Sodium Polyacrylate in Ceramics: Deflocculation, Body Reinforcement & Rheology Control
Sodium Polyacrylate in Ceramic Production
Sodium Polyacrylate (PAAS or NaPAA) is the most widely used organic polymer dispersant and body reinforcement agent in the ceramic industry. Compared with traditional inorganic deflocculants (such as sodium silicate and sodium tripolyphosphate), PAAS — with its unique polymer chain structure — simultaneously provides electrostatic repulsion and steric hindrance dual stabilization mechanisms, delivering superior performance in reducing slurry viscosity, increasing body strength, and improving rheological properties.
Since 1972, sodium polyacrylate-based products have entered the ceramic market and remain a core material for slurry deflocculation and body reinforcement to this day.
The effect of sodium polyacrylate in ceramic systems originates from its dual-function dispersion mechanism:
3.1 Slurry Deflocculation & Water Reduction
PAAS delivers excellent deflocculating performance in ceramic slurries. Studies show that adding 0.5% sodium polyacrylate to sanitary ware slurry — compared with the same amount of sodium silicate or soda ash — can improve slurry fluidity, reduce the thickening coefficient by 4%, and increase slurry stability.
In building ceramic bodies, PAAS effectively increases forming strength and reduces product deformation rate. In art porcelain bodies, at 0.6% binder addition, the dry strength increase rate reaches 167.5%, and the deformation rate drops from 50% to 10%.
For high-solid-content slurries (such as alumina and zirconia systems), PAAS is used as a dispersant at typical dosages of 0.35%–0.6% of powder weight, producing low-viscosity, highly stable slurries.
3.2 Body Reinforcement
PAAS is a key component of ceramic body reinforcement agents. In binder formulations, PAAS forms bridges and entanglements between particles through its polymer chains, significantly increasing green body flexural strength.
3.3 Glaze Slurry Performance Adjustment
PAAS is also used for glaze slurry performance adjustment. In opaque glaze formulations, adding 0.1%–0.5% of a PAAS-based glaze performance modifier can adjust glaze slurry viscosity and rheology to meet glazing requirements, while achieving simultaneous refinement of all glaze components.
3.4 Effect on Gypsum Molds
| Application | Recommended Dosage | Key Consideration |
|---|---|---|
| Sanitary ware / Building ceramic slurry deflocculation | 0.1%–0.5% | Molecular weight around 5,000 performs better |
| Art porcelain body reinforcement | 0.4%–0.6% | Molecular weight must be precisely controlled |
| Alumina / Zirconia slurry dispersion | 0.35%–0.6% | Must match pH conditions |
| Glaze slurry performance adjustment | 0.1%–0.5% | Avoid over-dosing causing sedimentation or thixotropy |
• Molecular weight sensitivity: Too low results in insufficient water reduction; too high may cause "polymer bridging," leading to over-dispersion and viscosity rebound
• pH control: Polyacrylic acid-based dispersants perform better under alkaline conditions (pH 8–12)
• Combined use: Blending PAAS with sodium silicate and sodium tripolyphosphate in appropriate ratios can produce composite dispersants with better performance and lower cost
"Polymer dual mechanism, integrated deflocculation and reinforcement" — achieving efficient deflocculation through electrostatic repulsion and steric hindrance, body reinforcement through hydrogen bonding and physical entanglement, while also providing glaze rheology control with low corrosiveness to gypsum molds.
- From sanitary ware to building ceramics, from art porcelain to advanced ceramics — PAAS has become an indispensable multifunctional organic additive in modern ceramic production
- Performance significantly outperforms traditional inorganic electrolytes — especially in applications requiring simultaneous high solid content, low viscosity, and high strength, PAAS demonstrates irreplaceable advantages
Sodium polyacrylate is the "multifunctional workhorse" of ceramic production — combining deflocculation, reinforcement, and rheology control in one molecule.
Keyword:
More News