NEWS

NEWS

Focus On High-Quality Silicate (Ceramic) Materials

Zirconium Silicate in Ceramic Production — Functions, Opacifying Effects, and Performance Differences by Zr Content (40%–65%


Time:

2026-08-31

Author:

Source:


Zirconium Silicate in Ceramic Production & Effects of Different Zr Content

Zirconium Silicate in Ceramic Production
—— Effects of Different Zr Content

📍 Ceramic Glaze · Opacifier 🧪 ZrSiO₄ 🏭 GOWAY Technical Series
📖 1. What is Zirconium Silicate? ZrSiO₄

Zirconium Silicate (chemical formula ZrSiO₄) is a functional powder material processed from natural zircon by ultra-fine grinding, iron and titanium removal, and surface modification. It is an indispensable opacifier and whitening agent in the modern ceramic industry, offering excellent corrosion resistance, abrasion resistance, hydrolysis resistance, and whitening power.

💡 Key Characteristics:
• Extremely high melting point: 2550°C, chemically stable
• Mohs hardness: 7.5–8, good wear resistance
• Unaffected by firing atmosphere, significantly improves body-glaze bonding
• Whitening mechanism: forms zirconia (ZrO₂) during firing, scattering incident light to achieve opacifying and whitening effects

Industry standards for zirconium silicate require D50 ≤ 2.0μm, D98 ≤ 10.0μm, with (ZrHf)O₂ content not less than 63.5%. Premium customers typically require (ZrHf)O₂ ≥ 64.5%, with some high-end products reaching 65% or higher.

🎯 2. Three Core Functions in Ceramics Opacifier · Whitener · Reinforcement
☁️
Opacifier
Imparts an opaque white appearance to ceramic glazes, covering body color
Recommended dosage: 12%–20% for white glazes, 4%–8% for colored glazes
✨
Whitening Agent
Forms zirconia crystals during firing, scattering incident light to produce whiteness
The higher the Zr content, the greater the whiteness; ultra-fine zirconium silicate can achieve the same whiteness with 20% less dosage
💪
Reinforcement
ZrSiO₄ particles disperse in the ceramic matrix, pinning cracks and preventing propagation
Adding 6% increases flexural strength from 58MPa to 106MPa — an 83% improvement
📌 Additionally, zirconium silicate improves hardness, chemical corrosion resistance, lowers thermal expansion coefficient, and increases the viscosity of the glaze system.
📊 3. Effects of Different Zr Content 40% – 65% Comparison

Zirconium silicate products are graded by (ZrHf)O₂ content. Common commercial grades include 40%, 50%, 60%, 64%, and 65%. The number directly represents the purity of zirconium in the product — higher content means better performance and higher price.

Zr Content Typical Grade Performance Characteristics Typical Applications
40% Zircon Flour Grade Lower whiteness, moderate opacifying effect, lowest cost Low-end ceramics, refractory fillers
50% Zircon Flour Grade Medium whiteness, limited opacifying effect General building ceramics, low-cost glazes
60% Standard Zirconium Silicate Good whiteness, meets basic opacifying needs Mid-range tiles, tableware ceramics
64% Premium Zirconium Silicate Excellent whiteness, stable opacifying effect Sanitary ware, high-end wall & floor tiles
65% Ultra-fine High-Purity Highest whiteness, up to 20% dosage reduction Premium sanitary ware, export-grade coffee cups, fine ceramics
⚠️ Negative Effects of Reduced Zr Content:
• Reduced opacifying power — requires higher dosage to achieve the same opacity
• Lower melting temperature of glaze — ZrSiO₄ melts at 2550°C; lower Zr content affects high-temperature performance
• Changes in glaze viscosity — strong Zr–O bonds increase viscosity; lower content alters this behavior
• Increased thermal expansion coefficient — ZrO₂ effectively lowers CTE; insufficient content reduces this effect
• Decreased mechanical strength — both compressive and tensile strength are compromised
• Reduced chemical durability — including water and acid/alkali resistance
🔬 4. Relationship Between Zr Content & Fineness Grinding Process Balance

During the production of zirconium silicate, there is a delicate balance between grinding fineness and Zr content. High-quality zircon sand typically has a (ZrHf)O₂ content of 65.5%–66.0%. However, during ultra-fine grinding, alumina from the grinding media and mill lining contaminates the product, causing Zr content to steadily decrease.

💡 Industry Practice:
• At D50 = 1.10μm, alumina ball and mill lining consumption is approximately 0.9%–1.4%
• Further grinding can cause Zr content to drop below 64.5% or even 64.0%, failing to meet premium customer requirements
• Premium ultra-fine zirconium silicate can maintain (ZrHf)O₂ ≥ 65.5% while achieving D50 = 0.6–0.8μm submicron fineness

Therefore, when purchasing zirconium silicate, don't just look at Zr content. You must also consider particle size distribution (D50, D90) and impurity levels (Fe₂O₃, TiO₂, Al₂O₃). Quality zirconium silicate products strike a balance between high Zr content and ultra-fine particle size, while maintaining low impurities to achieve optimal opacifying and whitening performance.

🧪 5. Practical Performance Comparison Production Data
Zr Content Glaze Whiteness Covering Power Dosage Comparison Cost Benefit
40% Low (Whiteness ≤ 75) Moderate Baseline Lowest cost, limited effect
50% Medium (Whiteness 75-80) Moderate Baseline Average value
60% Good (Whiteness 80-85) Good Baseline Moderate value
64% Excellent (Whiteness 85-90) Excellent 10-15% reduction High value
65% Superior (Whiteness ≥ 90) Superior 20% reduction Best overall value
📌 Note: Whiteness data are laboratory test values under standard conditions. Actual production results may vary depending on glaze formulation, firing schedule, and other factors.
🎯 6. How to Choose the Right Zirconium Silicate Product Selection Guide
✅ 3-Step Selection Process
  • Step 1: Define requirements — target whiteness, covering power, cost budget
  • Step 2: Match Zr content — refer to the comparison table above
  • Step 3: Verify fineness — check D50, D90 meet glaze process requirements
📋 Quick Reference
  • Low-end products → 40-50% Zr content
  • Mid-range products → 60% Zr content
  • High-end products → 64% Zr content
  • Premium/export products → 65%+ Zr content
✅ Value Recommendation: For most ceramic production needs, 64% Zr content zirconium silicate offers the best balance between performance and cost — it is currently the best value option on the market. The 65% high-purity grade is recommended for premium ceramics and export products where whiteness requirements are extremely demanding.
📌 7. Summary Key Takeaways
🎯 Three Core Functions
  • Opacifier — produces opaque white glaze finish
  • Whitening Agent — scatters light to increase whiteness; higher Zr content = whiter
  • Reinforcement — dispersion strengthening improves strength by 83%
📊 Zr Content Differences
  • 40-60% → Low/mid-range, moderate opacifying effect
  • 64% → Premium, excellent whiteness, best value
  • 65%+ → Ultra-fine high-purity, up to 20% dosage reduction
💡 One-Sentence Summary:
High Zr content + Ultra-fine particle size + Low impurities = Best opacifying & whitening performance.
64% Zr content is the best value choice for most ceramic production scenarios.

Keyword: