NEWS

NEWS

Focus On High-Quality Silicate (Ceramic) Materials
STPP vs Ceramic Deflocculant: Performance, Cost, Stability, and Selection Guide

STPP vs Ceramic Deflocculant: Performance, Cost, Stability, and Selection Guide

Compare STPP and ceramic deflocculants for slurry performance, cost, stability, compatibility, and best-use scenarios. Learn how to choose the right option for tile, glaze, and ceramic body production.

24

2026

/

04

What Is a Ceramic Body Binder? Functions, Benefits, and Defect-Control Solutions

What Is a Ceramic Body Binder? Functions, Benefits, and Defect-Control Solutions

Learn what a ceramic body binder does, how it improves green strength, and how to reduce viscosity, lamination, and drying defects in ceramic production.

23

2026

/

04

How to Fix Uneven Wall Thickness and Local Powdering in Ceramic Casting Slip

How to Fix Uneven Wall Thickness and Local Powdering in Ceramic Casting Slip

A factory-side guide to fixing uneven wall thickness and local powdering in ceramic casting slip through better deflocculant control, slip testing, mold management, and stable casting practice.

20

2026

/

04

Ultimate Factory-Side Solution: Why a Slip-Cast Body Does Not Release from the Mold After Casting

Ultimate Factory-Side Solution: Why a Slip-Cast Body Does Not Release from the Mold After Casting

A factory-grade guide to solving slip-casting demolding failure: why the cast body does not open, does not release, or stays too weak after casting, and how ceramic deflocculants affect rheology, casting rate, mold release, and green strength.

17

2026

/

04

Why More Ceramic Deflocculant Can Make Slip Worse: A Factory Guide to Over-Deflocculation, Thixotropy, and Recovery

Why More Ceramic Deflocculant Can Make Slip Worse: A Factory Guide to Over-Deflocculation, Thixotropy, and Recovery

A factory-side expert guide to why too much ceramic deflocculant can make slip more unstable, more thixotropic, and harder to control, with root causes, corrective actions, case analysis, FAQ, and FAQ schema.

14

2026

/

04

Why Deflocculated Casting Slip Thickens Again While Pouring Into a Plaster Mold

Why Deflocculated Casting Slip Thickens Again While Pouring Into a Plaster Mold

A factory-side guide to casting slip that thins at first but thickens again during plaster mold filling. Learn the causes of short-term rebound, mold-face stiffening, and how to keep pouring stable.

12

2026

/

04

Why a Casting Slip Stays Thick Even After Adding Deflocculant: The Factory-Level Solution

Why a Casting Slip Stays Thick Even After Adding Deflocculant: The Factory-Level Solution

A factory-side technical guide to fixing casting slips that remain thick even after adding Darvan, sodium silicate, or other ceramic deflocculants. Learn the real causes, data-backed diagnosis methods, and step-by-step correction strategy.

10

2026

/

04

Why a Glaze That Always Worked Suddenly Turns Chalky and Won’t Melt After a New Raw Material Batch

Why a Glaze That Always Worked Suddenly Turns Chalky and Won’t Melt After a New Raw Material Batch

A glaze that used to melt perfectly suddenly becomes chalky, white, and underfired after a new raw material batch. Discover the real root causes, how zirconium silicate affects melt behavior, and the factory-level solution for fast recovery.

08

2026

/

04

Ultimate Factory-Side Solution: Micro-Pinholes in a Zirconium Silicate Transparent Glaze

Ultimate Factory-Side Solution: Micro-Pinholes in a Zirconium Silicate Transparent Glaze

A transparent glaze containing zirconium silicate develops micro-pinholes. This factory-side guide explains the root causes, technical mechanisms, corrective actions, and commercial quality-control response.

06

2026

/

04

Why Adding Zirconium Silicate to a Clear Glaze Does Not Create a Stable Opaque White Glaze

Why Adding Zirconium Silicate to a Clear Glaze Does Not Create a Stable Opaque White Glaze

Adding zirconium silicate to a clear glaze may improve whiteness, but it does not automatically create a stable opaque white glaze. This factory-side guide explains the real root causes, route-selection logic, and the correct industrial solution.

03

2026

/

04

< 1...789...35 >

GOWAY INTERNATIONAL MATERIAL CO., LTD

Founded in 2009, we specialize in producing and supplying ,ceramic additives and related products, committing to supplying stable, environmentally friendly,professional and ceramic materials.

Contact Us

Contact Us

Company Phone/Wechat：86-0757-82131106 / +8613728575572
Company Fax：86-0757-82131106
Whatapp/skype: +8613600032377
E-mail：service@goway-china.com
Office Address: Room C11-6, Foshan National Torch Innovation and Pioneer Park, Jihua 2nd Road, Chancheng District, Foshan City, Guangdong Province, China.
Factory Address: Nanbian Industrial Zone, Sanshui District, Foshan City Guangdong Province，China.

Copyright © Foshan Goway New Materials Co., Ltd.   
Powered by:300.cnShunde   SEO

Home

Product

Tel

Message

Business license