NEWS

NEWS

Focus On High-Quality Silicate (Ceramic) Materials
The Non-Stick Protocol: Eliminating Demolding Adhesion in High-Volume Casting

The Non-Stick Protocol: Eliminating Demolding Adhesion in High-Volume Casting

Is your greenware sticking to the mold, causing rim deformation and production delays? Analysis of sodium migration, interface chemistry, and how to select a Ceramic Deflocculant to optimize rheological properties and ensure clean release.

14

2026

/

01

Industrial Winterization Protocol: Mitigating Deflocculant Freeze-Thaw Instability

Industrial Winterization Protocol: Mitigating Deflocculant Freeze-Thaw Instability

Did your bulk deflocculant shipment arrive frozen? Don't discard it. Analysis of polymer phase separation, the "High-Shear Restitution" protocol, and how to recover chemical efficacy to optimize rheological properties.

12

2026

/

01

The CMC Biostability Protocol: Eliminating Bacterial Degradation in Industrial Glaze Systems

The CMC Biostability Protocol: Eliminating Bacterial Degradation in Industrial Glaze Systems

Is your Carboxymethylcellulose (CMC) solution losing viscosity or developing foul odors? Analysis of enzymatic hydrolysis, gas-phase defects, and the industrial biocide protocols required for rheological stability.

10

2026

/

01

The Sodium Attack Protocol: Mitigating "Soft Shell" Defects and Mold Erosion in Mass Production

The Sodium Attack Protocol: Mitigating "Soft Shell" Defects and Mold Erosion in Mass Production

B2B Technical Guide: Why relying solely on Sodium Silicate is destroying your plaster molds and causing "soft skin" casting defects. Analysis of ion-exchange corrosion and the "Hybrid Dispersant Strategy" to extend mold life.

08

2026

/

01

Why Does Ceramic Slip Hard Pan? A Technical Protocol Based on Colloidal Stability

Why Does Ceramic Slip Hard Pan? A Technical Protocol Based on Colloidal Stability

A B2B technical guide on diagnosing and recovering "Hard-Panned" industrial casting slip. Analysis of Stoke’s Law violations, double-layer compression, and the chemical protocols required to restore suspension thixotropy.

06

2026

/

01

The Thermal Lag Protocol: Mastering Winter Deflocculation Kinetics

The Thermal Lag Protocol: Mastering Winter Deflocculation Kinetics

Ceramic process engineering guide: Why low temperatures falsely increase slip viscosity ("Thermal Lag") and how to manage deflocculation kinetics to prevent overdosing and hard-panning.

04

2026

/

01

The SG vs. Viscosity Trap: Why Adding Water is Ruining Your Slip

The SG vs. Viscosity Trap: Why Adding Water is Ruining Your Slip

Is your casting slip thick? Stop! Adding water might destroy your batch. Learn the critical difference between Specific Gravity and Viscosity, and master the "Two-Step Adjustment Protocol" to save your ware.

02

2026

/

01

The Reclaim Black Hole: Why Your Scrap Clay Eats Deflocculant (And How to Fix It)

The Reclaim Black Hole: Why Your Scrap Clay Eats Deflocculant (And How to Fix It)

Is your recycled casting slip refusing to liquefy no matter how much Sodium Silicate you add? You are in the "Reclaim Black Hole." Learn the Barium Carbonate Pre-treatment method to neutralize soluble salts and save your clay.

31

2025

/

12

The "Livering" Nightmare: How to Fix Jellied Casting Slip

The "Livering" Nightmare: How to Fix Jellied Casting Slip

Did your ceramic slip turn into an unpourable jelly after adding deflocculant? You are facing "Livering." Learn the science of ion overdose and the "Back-Mixing" technique to save your batch.

29

2025

/

12

Darvan 811 vs. Darvan 7: The Ultimate Selection Guide for Slip Casting

Darvan 811 vs. Darvan 7: The Ultimate Selection Guide for Slip Casting

Confused between Darvan 811 and Darvan 7? Using the wrong one can ruin your rheology and destroy your molds. Discover the chemical differences and the "Binary Bifurcation Strategy" to choose the perfect deflocculant.

27

2025

/

12

< 1...91011...35 >

GOWAY INTERNATIONAL MATERIAL CO., LTD

Founded in 2009, we specialize in producing and supplying ,ceramic additives and related products, committing to supplying stable, environmentally friendly,professional and ceramic materials.

Contact Us

Contact Us

Company Phone/Wechat：86-0757-82131106 / +8613728575572
Company Fax：86-0757-82131106
Whatapp/skype: +8613600032377
E-mail：service@goway-china.com
Office Address: Room C11-6, Foshan National Torch Innovation and Pioneer Park, Jihua 2nd Road, Chancheng District, Foshan City, Guangdong Province, China.
Factory Address: Nanbian Industrial Zone, Sanshui District, Foshan City Guangdong Province，China.

Copyright © Foshan Goway New Materials Co., Ltd.   
Powered by:300.cnShunde   SEO

Home

Product

Tel

Message

Business license