NEWS

Focus On High-Quality Silicate (Ceramic) Materials

common problem

Industry News

Dynamic content

Home

Goway discusses the relationship between the modulus and solubility of water glass

Category：

common problem

Time：

2023-04-18

Author：

Source：

佛山市古粤新型材料有限公司

Sodium water glass is commonly known as foam alkali, which is widely used in ceramic tile production and is also an important raw material for the production of ceramic water reducers. Next, Goway discusses the relationship between water glass and solubility.
Water glass is an ideal curing agent that is soluble in water, but as the modulus of water glass is larger, water glass is more difficult to dissolve in water. If we introduce the relationship between modulus and solubility according to mathematical thinking, it can be said that the modulus of water glass is inversely proportional to solubility. The water glass on the market is generally divided into two categories: one is sodium water glass, and the other is potassium water glass. Although the performance of the two water glasses is the same, the scope of application is very different.

1. How to test the modulus of water glass

Want to test the modulus of water glass can be measured by sampling survey, but this kind of measurement requires a large measurement base to ensure the accuracy of the measurement results. If there are special test strips or test tools, it is best to use test strips or tools. Because there is a certain contingency in sampling surveys, sometimes the measurement results may have certain errors. If you need to use water glass in the building, you must use precision instruments for measurement.

2. What are the main ingredients of water glass

In addition to the density, the main component of the water glass also affects the modulus. Water glass is generally made of quartz powder and soda ash. In the process of making, it needs to go through a high temperature of 1300 degrees to produce water glass. At this time, the factory will generally prepare different concentrations of water glass according to the needs of customers.

Goway has been specializing in the production of ceramic additives for 11 years. If you have any other questions, please contact us. Consulting Tel: 15820602536

Keyword：

Look over! Kaolin ceramic enhancer, wonderful!

None

Look over! Kaolin ceramic enhancer, wonderful!

None

More News

STPP vs Ceramic Deflocculant: Performance, Cost, Stability, and Selection Guide

Compare STPP and ceramic deflocculants for slurry performance, cost, stability, compatibility, and best-use scenarios. Learn how to choose the right option for tile, glaze, and ceramic body production.

2026-04-24

What Is a Ceramic Body Binder? Functions, Benefits, and Defect-Control Solutions

Learn what a ceramic body binder does, how it improves green strength, and how to reduce viscosity, lamination, and drying defects in ceramic production.

2026-04-23

How to Fix Uneven Wall Thickness and Local Powdering in Ceramic Casting Slip

A factory-side guide to fixing uneven wall thickness and local powdering in ceramic casting slip through better deflocculant control, slip testing, mold management, and stable casting practice.

2026-04-20

Ultimate Factory-Side Solution: Why a Slip-Cast Body Does Not Release from the Mold After Casting

A factory-grade guide to solving slip-casting demolding failure: why the cast body does not open, does not release, or stays too weak after casting, and how ceramic deflocculants affect rheology, casting rate, mold release, and green strength.

2026-04-17

Why More Ceramic Deflocculant Can Make Slip Worse: A Factory Guide to Over-Deflocculation, Thixotropy, and Recovery

A factory-side expert guide to why too much ceramic deflocculant can make slip more unstable, more thixotropic, and harder to control, with root causes, corrective actions, case analysis, FAQ, and FAQ schema.

2026-04-14

Why Deflocculated Casting Slip Thickens Again While Pouring Into a Plaster Mold

A factory-side guide to casting slip that thins at first but thickens again during plaster mold filling. Learn the causes of short-term rebound, mold-face stiffening, and how to keep pouring stable.

2026-04-12

GOWAY INTERNATIONAL MATERIAL CO., LTD

Founded in 2009, we specialize in producing and supplying ,ceramic additives and related products, committing to supplying stable, environmentally friendly,professional and ceramic materials.

Company Phone/Wechat：86-0757-88037132 / +8613728575572
Company Fax：86-0757-88037277
Whatapp/skype: +8613600032377
E-mail：info6@goway-china.com
Office Address: Room C11-6, Foshan National Torch Innovation and Pioneer Park, Jihua 2nd Road, Chancheng District, Foshan City, Guangdong Province, China.
Factory Address: Nanbian Industrial Zone, Sanshui District, Foshan City Guangdong Province，China.

E-mail

info6@goway-china.com

8613600032377

NEWS

Focus On High-Quality Silicate (Ceramic) Materials

Goway discusses the relationship between the modulus and solubility of water glass







