NEWS

NEWS

Focus On High-Quality Silicate (Ceramic) Materials
Why a Casting Slip Stays Thick Even After Adding Deflocculant: The Factory-Level Solution

Why a Casting Slip Stays Thick Even After Adding Deflocculant: The Factory-Level Solution

A factory-side technical guide to fixing casting slips that remain thick even after adding Darvan, sodium silicate, or other ceramic deflocculants. Learn the real causes, data-backed diagnosis methods, and step-by-step correction strategy.

10

2026

/

04

Why a Glaze That Always Worked Suddenly Turns Chalky and Won’t Melt After a New Raw Material Batch

Why a Glaze That Always Worked Suddenly Turns Chalky and Won’t Melt After a New Raw Material Batch

A glaze that used to melt perfectly suddenly becomes chalky, white, and underfired after a new raw material batch. Discover the real root causes, how zirconium silicate affects melt behavior, and the factory-level solution for fast recovery.

08

2026

/

04

Ultimate Factory-Side Solution: Micro-Pinholes in a Zirconium Silicate Transparent Glaze

Ultimate Factory-Side Solution: Micro-Pinholes in a Zirconium Silicate Transparent Glaze

A transparent glaze containing zirconium silicate develops micro-pinholes. This factory-side guide explains the root causes, technical mechanisms, corrective actions, and commercial quality-control response.

06

2026

/

04

Why Adding Zirconium Silicate to a Clear Glaze Does Not Create a Stable Opaque White Glaze

Why Adding Zirconium Silicate to a Clear Glaze Does Not Create a Stable Opaque White Glaze

Adding zirconium silicate to a clear glaze may improve whiteness, but it does not automatically create a stable opaque white glaze. This factory-side guide explains the real root causes, route-selection logic, and the correct industrial solution.

03

2026

/

04

Ultimate Factory-Side Solution: Why a Zirconium Silicate Opaque Base Glaze Suddenly Stops Melting

Ultimate Factory-Side Solution: Why a Zirconium Silicate Opaque Base Glaze Suddenly Stops Melting

03

2026

/

04

STPP in Ceramic Manufacturing: Uses, Dosage, Viscosity Control, Applications, and Buying Guide

STPP in Ceramic Manufacturing: Uses, Dosage, Viscosity Control, Applications, and Buying Guide

27

2026

/

03

High Temperature Ceramic Binder: Types, Temperature Limits & Selection Guide

High Temperature Ceramic Binder: Types, Temperature Limits & Selection Guide

Learn what a high temperature ceramic binder is, how it differs from standard binders, common chemistries like silicate, phosphate, and alumina-based systems, temperature ranges, refractory applications, and how to choose the right binder for coatings, sealants, and high-heat service.

25

2026

/

03

Ceramic Binder Composition: Ingredients, Formulation Logic, Resins, and Processing Effects

Ceramic Binder Composition: Ingredients, Formulation Logic, Resins, and Processing Effects

16

2026

/

03

What Is Binder Jetting in Ceramics? Process, Materials, Advantages, and Applications

What Is Binder Jetting in Ceramics? Process, Materials, Advantages, and Applications

Learn how binder jetting works in ceramics, which powders and binders are used, key printing parameters, post-processing steps, main advantages and limitations, and where binder-jetted ceramics are applied.

14

2026

/

03

Sodium Tripolyphosphate (STPP) in Ceramics: Technical Data, Mechanism & Selection Guide

Sodium Tripolyphosphate (STPP) in Ceramics: Technical Data, Mechanism & Selection Guide

Comprehensive technical analysis of STPP (CAS 7758-29-4) for ceramics. Includes typical physical parameters, deflocculation mechanisms, dosage ranges (0.15–0.50%), and comparative selection logic vs. silicates and polyacrylates.

03

2026

/

03

< 1...678...33 >

GOWAY INTERNATIONAL MATERIAL CO., LTD

Founded in 2009, we specialize in producing and supplying ,ceramic additives and related products, committing to supplying stable, environmentally friendly,professional and ceramic materials.

Contact Us

Contact Us

Company Phone/Wechat：86-0757-82131106 / +8613728575572
Company Fax：86-0757-82131106
Whatapp/skype: +8613600032377
E-mail：service@goway-china.com
Office Address: Room C11-6, Foshan National Torch Innovation and Pioneer Park, Jihua 2nd Road, Chancheng District, Foshan City, Guangdong Province, China.
Factory Address: Nanbian Industrial Zone, Sanshui District, Foshan City Guangdong Province，China.

Copyright © Foshan Goway New Materials Co., Ltd.   
Powered by:300.cnShunde   SEO

Home

Product

Tel

Message

Business license